- High abrasion resistance: long lasting
- High gloss
- Non flaking
- Non slippery
- Low cost
- Low tribogeneration generation
- UL Slip Resistance Tested
- No formaldehyde or phthalates
- Water-based: UV resistant
- Surface resistance (RTT): 106-109 ohms at recommended RH 30%-70%
- Industry standard, used worldwide
- RoHS compliant
- Made in the USA
Available by the case (4 One Gallon Containers), 5 Gallon or 55 Gallon containers
- 106 – 109 ohms: at 100v at 12% RH
- High gloss: aesthetics
- Low VOC: safety
- Easily applied: no drag
- 20-22% solids: long lasting
- UV resistant
- UL Slip Resistance Tested
- Maintains ESD tile, paint dissipative
- Industry’s longest lasting floor finish
- Made in the USA
Overview The Static Solutions Ohm-Shield™ Conduct Coat Floor Finish for Conductive Flooring is specially formulated to protect conductive/dissipative flooring and will lengthen its life. It offers long lasting, high gloss, static dissipative properties. With a low VOC level this product is safe and easy to use. May be used in clean rooms, pharmaceutical rooms and assembly areas. Available in 1 gallon containers (a case of four), 5-gallon pails and 55-gallon drums. (The online ordering does not calculate freight for 55-gallon drums. Please email contactus@StaticSolutions.com your zip code and indicate if you have a dock for delivery or not and we will offer you a quote.) Highlights- For use on floor surface
- Made in the USA
- 106 – 10 9 ohms resistance at 100v at 12% RH
- Urethane enhanced
- UV resistance
- High abrasion resistance
- UL Slip Resistance Tested
- Used on conductive flooring: concrete, epoxy, ESD epoxy and tile
- Low cost
- Made in the USA
- Conductive Floor Dissipative Coating
Highlights- Custom sizes available to be cut. Call or email with your specific measurements
- Electricals (106-108 RTG) lifetime warranty
- Conforms to the ESD S.20.20 spec standards
- Embossed finish no glare, easy cleaning
- Color: gray with white/black/other color speckles
- Thickness: .125”-.140” (3.1-3.5 mm) no curl, lays flat: no tripping
- Hardness: 85-94, no curl, low abrasion, long life
- 48” wide x 40’ long
- Decay rate: .05 sec. rapid, safe static drain
- Low abrasion: protects long term
- UV resistance color stability
- Flame retardant, meets building codes
- Material: industrial grade SBR/nitrile-abrasion resistance
- Antimicrobial
- Terra-Stat Floor Mat
- Removes dirt and black heel marks from ESD floor finishes
- No harmful chemicals: any formaldehyde, phthalate, ammonia, alkali, acid, phosphates, or abrasives
- Dries quickly
- 10:1 concentrate
- Easy to apply
- Low odor
- Rejuvenates the electrical properties of ESD floor finishes
- Coverage: 2000 square feet per gallon
- Made in the USA
Overview The Static Solutions Ohm-Shield™ ESD Floor Paint is a one-part latex coating ideally formulated for the electronic manufacturing environment. With consistent readings in the 106 - 108 ohms. GP-5600 is ideal for difficult to ground items that can not be solved by conventional means, such as walls, furniture components, shipping containers, shelving systems, work stands, cabinets and racks. The Static Solutions GP-5600 will eliminate the hassle of cumbersome floor mats when applied to the work area floor. Warm water and detergent will remove dirt and debris from cured GP-5600 floor paint. Available in 1 gallon containers, by the case (a case of four) or a 5-gallon pail. Highlights- Static Dissipative 106-108 ohms
- Product conforms to the ESD S.20.20 spec standards
- Neutral battle ship grey color, aesthetic
- Indoor paint
- Durable: long lasting
- Water based-safe
- Low cost: value priced
- Easy to apply
- High adhesion to concrete and wood
- Made in the USA
- ESD Grey Paint
- Non-toxic
- Low VOC formula
- Low foaming
- Biodegradable
- Zero tribogeneration generation
- Removes ESD floor finish safely and quickly
- 4:1 concentrate
- Made in the USA
Overview The Static Solutions Ohm-Shield™ Neutral Cleaner is used after stripping floors as a part of your overall ESD floor care program. Available in gallon, 5-gallon and 55-gallon containers. Highlights- Does not affect electrical properties of floor
- Reduces surface tension
- Restores gloss and electrical properties
- Non-flammable
- Easy and safe to use
- Environment friendly
- Cleans all ESD and non ESD mats
- Neutral Cleaner
Overview The Static Solutions Ohm-Shield™ ESD Mat And Floor Cleaner, 10:1 concentrate keeps your ESD mat clean with our specially formulatedcleaner. Works on floors and other surfaces. Don't risk adding static charges to your ESD products by using a cleaner that isn't in alignment with your overall ESD program. This cleaner helps you maintain the quality conditions you demand. Available in 1 gallon containers (a case of four) or a 5-gallon pail. Highlights- 10:1 Concentrated formula
- Can be used on an ESD mat or floor surface
- Made in the USA
- ESD Concentrate Mat Cleaner
- Fills in pores
- Used to prime and seal concrete and wood floors before painting with GP-5600
- Durable
- Easy to apply
- Made in the USA
Overview These roller covers are the recommended nap for applying the Static Solutions Ohm-Shield™ Urethane-Enhanced Conductive Floor Paint. Highlights- 1/4" Nap
- Fits most standard 9" rollers
- 3 - 9" x 1/4" Nap Roller Cover
Overview The Static Solutions Ohm-Shield™ ESD Floor Finish Concentrate With UV Additive is a static dissipative finish that will protect electronic devices from ESD damage and has an electrical resistivity of 106-109 ohms/sq. The UV additive in this floor finish provides an increased substrate adhesion, increased ESD longevity, and reduces greasiness. The Static Solutions ESD Floor Finish Concentrate with UV Additive has low tribogeneration, high abrasion resistance, and high gloss and is water based. Since its water based it's UL listed. This floor finish is made in the United States and has a low shipping cost since it is a concentrate. Available in 1 gallon containers (a case of four), 5-gallon pail or a 55-gallon drum. Highlights- UV additive: increase substrate adhesion, increases ESD longevity, and reduces greasiness
- Cost: since it is a concentrate the shipping cost is reduced since the water percentage is low
- Static dissipative: protects electronic devices from ESD damage. It also protects the workers from explosion, or ESD shock. The electrical resistivity is 106-109 ohms per square
- Product conforms to the ESD S.20.20 spec standards
- High abrasion resistance: long lasting, saves money on repetitive applications and repetitive shipping costs due to the UV additive
- High gloss: aesthetically appealing
- Low tribogeneration: protects device from ESD damage
- UL Slip Resistance Tested
- No formaldehyde, glycol ether DE, DPP, phosphates, alkylphenol, ethoxylate, butoxyethanol, petroleum distillates or phthalates: safe to use
- No alkalis, acids or ammonia: safe to use
- Water based: dries quickly, safe to use, biodegradable, non-flammable and low odor
- Cost saving
- Made in the USA
- Floor Finish Concentrate with UV Additive