- Measures from 100 kilohms - 1000 megohms
- Internal component upgrade for CT-8700 and CT-8900 testers
- 1000 Meg Upgrade
Overview The Static Solutions CT-1000 Ohm-Stat 1000 Meg Upgrade can be use with any current purchase of either the Static Solutions Ohm-Stat CT-8700 or CT-8900 tester. Both testers individually and simultaneously test a wrist strap and heel grounder resistivity value in less than 3 seconds. The CT-8700 is the combination tester, footplate and stand while the CT-8900 is the deluxe combination tester, footplate and stand with computer interface. (You can upgrade a previously purchased CT-8700 or CT-8900 but must contact us first at 978-310-7251 or email to make prior arrangements.) Highlights
Overview The Static Solutions ESD bags are the ideal choice for storing your sensitive materials and products. Each size comes with a total of 100 bags per pack. “You are powerful! Be grounded.” Highlights- Meets the required limits of ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Control Bag standard ANSI/ESD
- Electrical Properties Typical Values Test Procedures/Method
- Surface Resistance:
- Outer Surface: 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11
- Inner Surface: 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11
- Discharge Shielding <20 nJ ANSI/ESD STM11.31, EIA 541
- Charge Generation Teflon: 0.09 nC/sq. in. Modified Incline Plane
- Quartz: 0.01 nC/sq. in. Modofied Incline Plane
- Capacitance Probe (to dissipate 1 KV) <30 volts ANSI/EIA-541/Appendix E, 1kV discharge
- Bag Thickness:
- Thickness Nominal 0.0030” (.0762mm) ±10% MIL-STD-3010, 1003
- Width (Inside Dimensions) Nominal –0” / +0.125”
- Length (Inside Dimensions) Nominal ±0.125”
- Light Transmission >40% (Tobias) ASTM D-1003
- Heat Seal >10lbs/in 375°F, 1/2 sec 60 psi
- Tensile 9000 PSI ASTM D882
- Puncture Resistance >10lbs MIL-STF-3010, 2065
- MVTR <0.40 FTMS 101C/2065
- Non-corrosive Pass MIL-STF-3010, M3005
- No corrosion effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel
- Polycarbonate Capability
- Bag is free of amines, N-octanoic acid, silicones, and heavy metals
- 1 package of 100 ESD bags
- 25 snaps (male and female pieces)
- 1 punch toolset includes the punch and strike base
OverviewThe Static Solutions CC-2641 Ohm-Stat™ Two Cords With Banana 3.5mm Plugs can be used in a number of ways including with the RT-1000. Includes one coil cord. Highlights- High resistant cords
- Fits into Ohm-Stat™ RT-1000 Resistivity Tester
What’s Included
- 2 Banana/3.5mm (stereo) Cords
- 1 Banana/Banana Coil Cord with Removable Alligator Clip
Overview The Static Solutions Ohm-Stat™ 24" Drag Chain For Rolling Carts And Chairs is designed to be secured to your cart or chair by looping one end around and securing it to itself with the snap. The chain includes a one meg resistor. Available with a cylinder ideal for use on carts and chairs. Highlights- 24” nickel plated steel chain
- Includes one meg resistor
- Used to ground carts and chairs
- Made in the USA
- 24" drag chain
Overview The Static Solutions Ohm-Stat™ 24" Drag Chain With Cylinder For Rolling Carts And Chairs is designed to be secured to your cart or chair by clipping one end and looping the other end on your cart or chair allowing the cylinder to roll in-between. Available without cylinder here. Highlights- 24” nickel plated chain
- 2” cylinder, self-cleaning
- Clip for attachment
- Hook for attachment
- Made in the USA
- 24" drag chain with cylinder
OverviewThe Static Solutions DH-912PP Ohm-Stat™ Anti-Static Sheet Protector Document Holder With Grommet offers easy storage of a document for those who are concerned with ESD. The large transparent surface allows for easy reading of the enclosed document.Highlights
- Made from durable, heavy duty, anti-static plastic, will not tear
- It is transparent so the documents are easy to read
- Product conforms to the ESD S.20.20 spec standards
- 106- 1011 ohms/sq. at 100v
- Low tribogeneration
- Metal grommet makes for easy attachment to machines and test equipment
- High quality sewn edges
- Easy to clean: heat, solvent resistance
- Non-vinyl
- Sized at 9”x12” to accommodate average size paper
What’s Included
- 1 document holder
OverviewThe Static Solutions BC-8950 Ohm-Stat Barcode or Magnetic Stripe Reader is for use with the Static Solutions CT-8900 tester. The CT-8900 individually and simultaneously tests, prints, stores, and e-mails each wrist strap and heel grounder resistivity value in less than 3 seconds. Used at manufacturing companies internationally and domestically, it offers adjustable limits, exact resistivity readings, unique report generation groups, versatile networking options, an expandable employee log of 30,000 and is foolproof. Highlights- Reads all codes infrared or visible
- Barcode
- USB terminated
- Made in the USA
What’s Included
- Barcode Reader
OverviewThe Static Solutions BM-3516 Ohm-Stat™ Bench Block Ground And Wrist Strap Dock offers two grounding points for a wrist strap. Works well with the Ohm-Stat™ Guardian Pro or any of our constant monitors. Highlights- Two banana jacks: provides two grounding points for wriststrap cords
- Ring terminal at end of cord: allows simple attachment to electrical ground
- Can be used with constant monitors like the Guardian™ CM-1700
- Mounts under the front edge of workstation: saves work space and avoids cord tangles
- Two 4mm “parking studs”: helps prevent loss and damage to wrist strap cord when not used
- Insulated wires prevent shortage
- Heavy duty industrial grade paint: reduces paint chipping and rusting
- Made in the USA
What’s Included
- Bench Block Ground And Wrist Strap Dock
OverviewThe Static Solutions Ohm-Stat™ CP-1500 Chair Probe can be used to test your office or workstation chairs by placing the chair on the test plate and testing with a meter such as the Ohm-Stat™ RT-1000 Resistivity Tester.Highlights- Stainless steel fabricated
- Test chairs with a resistance meter like the Ohm-Stat™ RT-1000 Resistivity Tester
What’s Included
- 1 Plate
OverviewThe Static Solutions CP-1111 Ohm-Stat™ Concentric Ring Probe For ESD Resistivity Meters is a top of the line ESD probe so you can measure the volume resistance of a surface or material. Works well with the Ohm-Stat™ RT-1000 Resistivity Meter. Highlights- Made from conductive rubber shore A scale 50-60
- Five pound weighted probe coated with insulative paint
- Can be calibrated
- Product conforms to the ESD S.20.20 spec standards
- 1 year limited warranty
- Made in the USA
What’s Included
- 1 probe
Overview The Static Solutions Ohm-Stat™ DR-9800 Door Opening Relay can be added to any current, or previous purchase of either a CT-8700 and CT-8900, transmitting information to a secure room door once the user receives the acceptable ESD test results. Photo shows the relay attached to a Static Solutions CT-8900. Highlights- Can be attached to any type wired turn style or door allowing relay access
- Easy to attach door relay wiring
- Relay wiring pigtails (We attach the relay to your CT-8700 or CT-8900)