- Measures from 100 kilohms - 1000 megohms
- Internal component upgrade for CT-8700 and CT-8900 testers
- 1000 Meg Upgrade
Overview The Static Solutions CT-1000 Ohm-Stat 1000 Meg Upgrade can be use with any current purchase of either the Static Solutions Ohm-Stat CT-8700 or CT-8900 tester. Both testers individually and simultaneously test a wrist strap and heel grounder resistivity value in less than 3 seconds. The CT-8700 is the combination tester, footplate and stand while the CT-8900 is the deluxe combination tester, footplate and stand with computer interface. (You can upgrade a previously purchased CT-8700 or CT-8900 but must contact us first at 978-310-7251 or email to make prior arrangements.) Highlights
Overview The Static Solutions ESD bags are the ideal choice for storing your sensitive materials and products. Each size comes with a total of 100 bags per pack. “You are powerful! Be grounded.” Highlights- Meets the required limits of ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Control Bag standard ANSI/ESD
- Electrical Properties Typical Values Test Procedures/Method
- Surface Resistance:
- Outer Surface: 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11
- Inner Surface: 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11
- Discharge Shielding <20 nJ ANSI/ESD STM11.31, EIA 541
- Charge Generation Teflon: 0.09 nC/sq. in. Modified Incline Plane
- Quartz: 0.01 nC/sq. in. Modofied Incline Plane
- Capacitance Probe (to dissipate 1 KV) <30 volts ANSI/EIA-541/Appendix E, 1kV discharge
- Bag Thickness:
- Thickness Nominal 0.0030” (.0762mm) ±10% MIL-STD-3010, 1003
- Width (Inside Dimensions) Nominal –0” / +0.125”
- Length (Inside Dimensions) Nominal ±0.125”
- Light Transmission >40% (Tobias) ASTM D-1003
- Heat Seal >10lbs/in 375°F, 1/2 sec 60 psi
- Tensile 9000 PSI ASTM D882
- Puncture Resistance >10lbs MIL-STF-3010, 2065
- MVTR <0.40 FTMS 101C/2065
- Non-corrosive Pass MIL-STF-3010, M3005
- No corrosion effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel
- Polycarbonate Capability
- Bag is free of amines, N-octanoic acid, silicones, and heavy metals
- 1 package of 100 ESD bags
- 25 snaps (male and female pieces)
- 1 punch toolset includes the punch and strike base
OverviewThe Static Solutions CC-2641 Ohm-Stat™ Two Cords With Banana 3.5mm Plugs can be used in a number of ways including with the RT-1000. Includes one coil cord. Highlights- High resistant cords
- Fits into Ohm-Stat™ RT-1000 Resistivity Tester
What’s Included
- 2 Banana/3.5mm (stereo) Cords
- 1 Banana/Banana Coil Cord with Removable Alligator Clip
Overview The Static Solutions Ohm-Stat™ 24" Drag Chain For Rolling Carts And Chairs is designed to be secured to your cart or chair by looping one end around and securing it to itself with the snap. The chain includes a one meg resistor. Available with a cylinder ideal for use on carts and chairs. Highlights- 24” nickel plated steel chain
- Includes one meg resistor
- Used to ground carts and chairs
- Made in the USA
- 24" drag chain
Overview The Static Solutions Ohm-Stat™ 24" Drag Chain With Cylinder For Rolling Carts And Chairs is designed to be secured to your cart or chair by clipping one end and looping the other end on your cart or chair allowing the cylinder to roll in-between. Available without cylinder here. Highlights- 24” nickel plated chain
- 2” cylinder, self-cleaning
- Clip for attachment
- Hook for attachment
- Made in the USA
- 24" drag chain with cylinder
OverviewThe Static Solutions DH-912PP Ohm-Stat™ Anti-Static Sheet Protector Document Holder With Grommet offers easy storage of a document for those who are concerned with ESD. The large transparent surface allows for easy reading of the enclosed document.Highlights
- Made from durable, heavy duty, anti-static plastic, will not tear
- It is transparent so the documents are easy to read
- Product conforms to the ESD S.20.20 spec standards
- 106- 1011 ohms/sq. at 100v
- Low tribogeneration
- Metal grommet makes for easy attachment to machines and test equipment
- High quality sewn edges
- Easy to clean: heat, solvent resistance
- Non-vinyl
- Sized at 9”x12” to accommodate average size paper
What’s Included
- 1 document holder
OverviewThe Static Solutions BC-8950 Ohm-Stat Barcode or Magnetic Stripe Reader is for use with the Static Solutions CT-8900 tester. The CT-8900 individually and simultaneously tests, prints, stores, and e-mails each wrist strap and heel grounder resistivity value in less than 3 seconds. Used at manufacturing companies internationally and domestically, it offers adjustable limits, exact resistivity readings, unique report generation groups, versatile networking options, an expandable employee log of 30,000 and is foolproof. Highlights- Reads all codes infrared or visible
- Barcode
- USB terminated
- Made in the USA
What’s Included
- Barcode Reader
OverviewThe Static Solutions BM-3516 Ohm-Stat™ Bench Block Ground And Wrist Strap Dock offers two grounding points for a wrist strap. Works well with the Ohm-Stat™ Guardian Pro or any of our constant monitors. Highlights- Two banana jacks: provides two grounding points for wriststrap cords
- Ring terminal at end of cord: allows simple attachment to electrical ground
- Can be used with constant monitors like the Guardian™ CM-1700
- Mounts under the front edge of workstation: saves work space and avoids cord tangles
- Two 4mm “parking studs”: helps prevent loss and damage to wrist strap cord when not used
- Insulated wires prevent shortage
- Heavy duty industrial grade paint: reduces paint chipping and rusting
- Made in the USA
What’s Included
- Bench Block Ground And Wrist Strap Dock
OverviewThe Static Solutions Ohm-Stat™ CP-1500 Chair Probe can be used to test your office or workstation chairs by placing the chair on the test plate and testing with a meter such as the Ohm-Stat™ RT-1000 Resistivity Tester.Highlights- Stainless steel fabricated
- Test chairs with a resistance meter like the Ohm-Stat™ RT-1000 Resistivity Tester
What’s Included
- 1 Plate
OverviewThe Static Solutions CP-1111 Ohm-Stat™ Concentric Ring Probe For ESD Resistivity Meters is a top of the line ESD probe so you can measure the volume resistance of a surface or material. Works well with the Ohm-Stat™ RT-1000 Resistivity Meter. Highlights- Made from conductive rubber shore A scale 50-60
- Five pound weighted probe coated with insulative paint
- Can be calibrated
- Product conforms to the ESD S.20.20 spec standards
- 1 year limited warranty
- Made in the USA
What’s Included
- 1 probe
Overview The Static Solutions Ohm-Stat™ DR-9800 Door Opening Relay can be added to any current, or previous purchase of either a CT-8700 and CT-8900, transmitting information to a secure room door once the user receives the acceptable ESD test results. Photo shows the relay attached to a Static Solutions CT-8900. Highlights- Can be attached to any type wired turn style or door allowing relay access
- Easy to attach door relay wiring
- Relay wiring pigtails (We attach the relay to your CT-8700 or CT-8900)
OverviewThe Static Solutions SP-102 Earth Ground Checker with coil cord and wrist strap safely dissipates harmful charges with guaranteed long lasting protection. ESD S1.1 standard recommends the use of static control wrist straps to complete an effective ESD control system. Normal activity builds harmful static charges, if an ungrounded user makes contact with a static sensitive device the result can be costly and damaging. The patented design of the wrist strap prevents the fabric of the wrist strap from interfering with contact of the user to the buckle providing a direct connection for optimal function as well as offering amazing comfort. Only the Ohm-Stat Series offers long lasting, high quality wrist straps with innovative design on a price conscience schedule. Static Solutions wrist straps are made with quality control and 20/20 conformance. They are easily cleaned with a mild detergent.Highlights
- Blue adjustable ESD wrist strap
- 4mm machine stainless steel snap
- Easy to plug in a banana plug terminated wriststrap
- Tough impact: resistant high polymer is ultrasonically welded for added protection
- Hard ground to an electrical system drains charges from the wearer
- Provides proper grounding and prevents new charges from accumulating on wearer
- Makes receptacles/workers/field service kits grounded properly
- High visible LED indicator lights provide visual proof of correct ground or any common ground faults
- Indicator lamps have wrap-around lens covers for high visibility at all angles
- Checks the wiring faults on 3 wire, 120v circuits
- Medical grade stainless steel
- Includes coil cord
What’s Included
- Blue ESD Wrist Strap
- 10’ coil cord
- SP-101 Earth Ground Checker with banana plug receptical
- Alligator clip
OverviewThe Static Solutions Ohm-Stat™ ESD Sensitive Aisle Warning Tape is available in a bright yellow with black lettering in either 2" or 3" width. Both widths are 36 yards long (108 feet)
Highlights
- Easy to see color
- Warns employees and visitors of an ESD area
- High adhesion to concrete paint, ESD floor finish, epoxy, or tiles
- Product conforms to the ESD S.20.20 spec standards
- Made in the USA
What’s Included
- 1 roll of tape
OverviewThe Static Solutions GC-5621 Ohm-Stat™ Garment Clips is an optional probe that is for use with the Static Solutions RT-1000 Ohm-Stat Standard Resistivity Test Kit that accurately measures surface resistivity or ESD garments and conforms to the ESD-STM2 1-1997 specifications. Highlights- Measure resistance of ESD garments
- Stainless steel surface areas
- Product conforms to the ESD S.20.20 spec standards
- Used with the Ohm-Stat™ RT-1000 resistivity meter
- 1 year warranty
- Made in the USA
What’s Included
- Two ESD Garment Clips
- High strength tinsel wire
- Black dome 10mm male snap
- Ring terminated
- UL listed
- 10mm male snap attaches to workstation 10mm female snaps
Overview This optional miniature probe is used with the Ohm-Stat RT-1000 Standard Resistivity Tester. It accurately measures surface resistivity and conforms to the EOS/ESD 11.11 specifications. The MP-1235 replaces our older miniature probe the MP-1234 with a newly designed unit. Highlights- Has 2 female banana jacks to connect to any high quality resistance/resistivity meters like the RT-1000 and the RT-500 resistivity meters
- Product conforms to the ESD S.20.20 spec standards
- Conforms to all EOS and CE test procedures
- Made in the USA
- Probe
Overview The Static Solutions NT-1010 Ohm-Stat NIST Calibration and Certificate. Available as a Standard Calibration or with Before And After Data. Please send a copy of this order with your contact information and only the meter (do not include any meter cases or accessories) to: Static Solutions, Inc. Calibrations 399 River Road Hudson, MA 01749 When the calibration is complete we will contact you to arrange for payment of return shipping. Highlights- NIST Calibration and Certificate
- 1 NIST Calibration and Certificate
OverviewThe Static Solutions Ohm-Stat™ MP-6533 - Personal Wrist Strap Test Probe can be used to test for harmful static charges. ESD S1.1 standard recommends the use of static control wrist straps to complete an effective ESD control system. Normal activity builds harmful static charges, if an ungrounded user makes contact with a static sensitive device the result can be costly and damaging. Highlights- Conductive metal cylinder
- Attaches easily to most resistance testers like the Ohm-Stat™ RT-1000 resistivity meters
- Tests most wrist straps and shoes
- Terminated with a banana plug
- Product conforms to the ESD S.20.20 spec standards
- Made in the USA
What’s Included
- Conductive metal cylinder
OverviewThe Static Solutions Ohm-Stat™ Proximity Reader can work for your situation or you can add this to either of our top selling testers: Ohm-Stat™ Wrist Strap/Heel Grounder Tester Kit or the top of the line Ohm-Stat™ Deluxe Wrist Strap/Heel Grounder Tester And Data Logger. Highlights- Reads all HID, Casi-Rusco, and Indala proximity cards
- USB terminated and powered
- LED and buzzer display
- Made in the USA
What’s Included
- Proximity Reader
Overview The Static Solutions Ohm-Stat™ Resistance Probes for ESD Resistivity Meters can be used with our meters or for most ESD probe needs. Highlights- 2 five pound probes required for RTT,RTG, RTV resistance measurement
- Coated with insulative paint (not dissipative PVC sleeves)
- Conductive silicone rubber
- Easy to carry insulative handles
- NIST certificate
- Product conforms to the ESD S.20.20 spec standards
- Will work with all high quality meters like the Ohm-Stat™ RT-1000 and the Ohm-Stat™ RT-500 resistivity meters
- 1 year warranty
- Use for resistance testing of floors, work surfaces, floor mats, paints and floor finishes
- Available are two test ground cords banana to monaural 3.5 mm plug
- Made in the USA
- Probes
OverviewThe Static Solutions Ohm-Stat™ Waste Baskets ESD are available in Carbon Black or Grey and are designed to work with our ESD waste basket liners. Highlights- 10 per case
- 22” tall: easily fits under the workstation
- Point to point resistance RTT: 105 – 109 ohms at 100v
- 13” diameter opening
- 44 quart (11 gallon)
- Product conforms to the ESD S.20.20 spec standards
- Static dissipative bags available
- Made in the USA
What’s Included
- 10 ESD Waste Baskets
- Out of stock
OverviewThe Static Solutions Ohm-Stat™ Waste Basket ESD Liners are ideal for most 44 quart baskets as well as our line of waste baskets. Highlights- Holds 44 quarts
- Anti-static polyethylene
- Consistently under 1012 ohms
- Ideal for cleanroom applications
- Made in the USA
What’s Included
- 50 count trash liners
OverviewThe Static Solutions GC-9010 Ohm-Stat™ Work Surface Ground Cord 10mm Male Snap With Dual Banana Female Jack allows you to connect our Ultimat and your wrist straps.
Highlights
- 1 meg resistor
- High strength tinsel wire
- Ring terminal for easy attachment
- Black color
- 10’ long
- 10mm male snap attaches to workstation Ultimat™ female snaps
- Accepts two banana plug terminated wrist straps such as the Elastic Adjustable Wrist Strap
What’s Included
- One cord
OverviewThe Static Solutions Ohm-Stat FP-1745 is a plate that is for use with the Static Solutions Ohm-Stat RT-1000 Standard Resistivity Tester. It accurately measures surface resistivity and conforms to the EOS/ESD 11.11 specifications. Highlights- Stainless steel foot plate to test shoes
- Measure resistance through shoes to plate
- Works with RT-1000 and most high quality meters with two external jacks
What’s Included
- 1 Foot Plate
OverviewThe Static Solutions FS-8900 Ohm-Stat Dual Path Floor Stand Replacement Post is for use with Static Solutions CT-8900 and CT-8700 testers. Highlights- Post is black
What’s Included
- Metal Post
OverviewThe Static Solutions Replacement Heavy Duty Base Footplate Dual Feet is a durable foot plate with mounting holes that can also be used with the FS-8900 Ohm-Stat Dual Path Floor Stand. Highlights- Wide Base
- Duel Foot Plates
- Bright Yellow
- Designed for humidity conditions of 75% or less
What’s Included
- Footplate Base
OverviewThe Static Solutions Ohm-Stat Wrist Strap Coil Cord with alligator clip can safely dissipate harmful charges with long lasting protection. ESD S1.1 standard recommends the use of static control wrist straps as an effective ESD control system. Normal activity builds harmful static charges, if an ungrounded user makes contact with a static sensitive device the result can be costly and damaging. Available with a wrist strap here.Highlights
- Cord with alligator clip and 1 meg resistor
What’s Included
- 10' coil cord with alligator clip and 1 meg resistor